Lutron® DVRF-6L-WH Caséta Diva Smart Dimmer Switch, White
MFR Part #:DVRF-6L-WH
- Amperage Rating :0.125
- Color :White
- Lamp Type :CFL/LED/Incandescent/Halogen
- Manufacturer Name :Lutron
- Number of Poles :3
- Operation Mode :Rocker Slide
Short Product Summary
The Lutron DVRF‑6L Diva Smart Dimmer is an in‑wall lighting control designed for dimmable LED, incandescent, and halogen loads. It provides local dimming control and can integrate into a Caséta smart lighting system for expanded functionality.
Key Features & Benefits
- Forward-phase dimming control → Supports smooth dimming of compatible LED, incandescent, and halogen loads for consistent light adjustment
- No neutral wire required (2-wire design) → Enables installation in existing homes without rewiring
- 120 V operation (50/60 Hz) → Compatible with standard North American residential electrical systems
- Works with Pico remote controls and sensors → Allows multi-location control and flexible installation without additional wiring
- Clear Connect RF technology → Provides wireless communication through walls and floors for system expansion
- Front Accessible Service Switch (FASS) → Safely disconnects power for lamp replacement without turning off the breaker
- Power failure memory → Returns lights to the previous level after power is restored
- Supports 3‑way applications → Can be used with a mechanical switch or compatible accessory switch in multi-location setups
Detailed Technical Specifications
Specification
Details
Model
DVRF‑6L
Product Type
In-wall dimmer
Voltage
120 V~
Frequency
50/60 Hz
Dimming Type
Forward-phase
Neutral Requirement
Not required
Load Types
Dimmable LED, incandescent, halogen
Minimum Load
25 W (LED: 1 bulb minimum)
Maximum Load
150 W LED / 600 W incandescent or halogen
Wiring
Single-pole or 3-way
Multi-location Options
Mechanical switch, Pico remote, or accessory switch (DVRF-AS)
Wireless Technology
Clear Connect RF
Wallbox Requirement
1-gang U.S. wallbox (minimum 2¼ in depth; 3½ in recommended)
Certifications
cULus, FCC, Industry Canada, NOM
Use Cases / Applications
- Residential lighting control upgrades → Replace standard switches with dimmable control for LED or incandescent fixtures
- Multi-location lighting control → Enable 3-way or multi-point control using accessory switches or wireless remotes
- Retrofit installations → Ideal for older homes where neutral wiring is not available
- Room-based lighting adjustment → Living rooms, bedrooms, and kitchens requiring adjustable brightness levels
Compatibility / What it works with
Works With:
- Dimmable screw-in LED, incandescent, and halogen lamps
- Pico remote controls (multi-location control)
- Caséta motion sensors and occupancy sensors (standalone compatibility noted)
- Lutron Smart Hub / Smart Hub PRO for app-based control
- Claro accessory switch (DVRF-AS)
Not Supported:
- Non-dimmable loads
- Receptacles, motor-driven appliances, or transformer-supplied loads
- ELV or MLV lighting loads
FAQs
What loads can the Lutron DVRF‑6L control?
The Lutron DVRF‑6L Diva Smart Dimmer is designed for dimmable LED, incandescent, and halogen lighting loads.
Does this dimmer require a neutral wire?
No. The DVRF‑6L uses a 2-wire design and does not require a neutral connection for installation.
Can this dimmer be used in a 3-way setup?
Yes. It supports 3-way configurations using either a mechanical switch or compatible accessory devices.
What is the maximum load capacity?
The dimmer supports up to 150 W of LED load or 600 W of incandescent/halogen load, depending on the lamp type.
Can the dimmer control outlets or appliances?
No. It is only intended for permanently installed lighting fixtures and must not be used to control receptacles or motor-driven equipment.
- Lutron® DVRF-6L-WH DVRF Designer Dimmer, On/Off Switch, Rocker Slide Operation, 120 V, CFL/LED/Incandescent/Halogen Lamp